1 n-channel 100-v (d-s) mosfet features ? trenchfet ? power mosfet ? 175 c junction temperature ? low thermal resistance package ? 100 % r g test ed applications ? isolated dc/dc converters prod uct summary v ( br)dss (v) r ds(on) ( )i d (a ) 200 0.030 at v gs = 1 0 v 65 a n-channel mosfe t g d s notes: a. package limited. b. duty cycle 1 %. c. see soa curve for voltage derating. d. when mounted on 1" square pcb (fr-4 material). absolute maximum ratings t c = 25 c, unless otherwise noted p arameter symbol limit unit drain-source voltage v ds 100 v gat e-source voltage v gs 20 contin uous drain current (t j = 175 c) t c = 25 c i d 65 a a t c = 125 c 37 a pulsed dr ain current i dm 140 a valanche current l = 0.1 mh i as 35 single pulse a valanche energy b e as 61 mj maximum power dissipation b t c = 25 c p d 37 5 c w t a = 25 c d 3.75 ope rating junction and storage temperature range t j , t stg - 55 to 1 75 c thermal resistance ratings p arameter symbol limit unit junction-to-ambient pcb mount (to-263) d r th ja 40 c /w junction-to-case (drain) r th jc 0.4 rohs compliant t o-220ab t op v iew gd s dt - www. daysemi.jp
2 no tes: a. pulse test; pulse width 300 s, duty cycle 2 %. b. guaranteed by design, not subject to production testing. c. independent of operating temperature. st resses beyond those listed under ?absolute maximum ratings? ma y cause permanent damage to the device. these are stress rating s only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. exposure to absolute maximum rating conditions for extended periods may affect device reliability. s pecifications t j = 25 c, unless otherwise noted p arameter symbol test conditions min. typ. max. unit static drain-source breakdo wn voltage v ( br)dss v ds = 0 v , i d = 250 a 100 v gate-thre shold voltage v gs( th) v ds = v gs , i d = 250 a 24 gate-b ody leakage i gss v ds = 0 v , v gs = 20 v 100 na zero gate voltage drain current i dss v ds = 100 v , v gs = 0 v 1 a v ds = 100 v , v gs = 0 v , t j = 125 c 50 v ds = 100 v , v gs = 0 v , t j = 175 c 250 on-state drain current a i d( on) v ds 5 v , v gs = 1 0 v 120 a drain-source on-state resistance a r ds( on) v gs = 10 v , i d = 30 a 0.023 0.030 v gs = 10 v , i d = 30 a, t j = 125 c 0.063 v gs = 10 v , i d = 30 a, t j = 175 c 0.084 forward transconductance a g fs v ds = 15 v , i d = 30 a 25 s dy namic b inpu t capacitance c iss v gs = 0 v , v ds = 25 v , f = 1 mhz 5100 pf output capacitance c oss 480 re verse transfer capacitance c rs s 210 t otal gate charge c q g v ds = 10 0 v, v gs = 1 0 v, i d = 6 5 a 90 130 nc gate-source charge c q gs 23 gate- drain charge c q gd 34 g ate resistance r g 0. 5 1.7 3.3 tu r n - o n d e l ay t i m e c t d(on ) v dd = 100 v , r l = 1.5 i d ? 65 a, v ge n = 10 v, r g = 2.5 24 35 ns rise time c t r 220 330 turn-off delay time c t d(off) 45 70 fall time c t f 200 300 so urce-drain diode ratings and characteristics t c = 25 c b co ntinuous current i s 65 a pulse d current i sm 14 0 forward voltage a v sd i f = 65 a, v gs = 0 v 1.0 1.5 v reverse recovery time t rr i f = 50 a, di/dt = 100 a/s 130 200 ns peak reverse recovery current i rm( rec) 81 2a reverse recovery charge q rr 0.52 1.2 c dt - www. daysemi.jp
3 typica l characteristics 25 c, unless otherwise noted outp ut characteristics transconductance capacitance 0 20 40 60 80 100 120 140 0 246810 v ds - drain-to-source voltage (v) v gs = 10 thr u 7 v 4 v - drain current (a) i d 6 v 5 v 0 30 60 90 120 150 180 0 20 40 60 80 100 120 - transconductance (s) g fs t c = - 55 c 25 c 125 c i d - drain current (a) 0 1000 2000 3000 4000 5000 6000 7000 0 25 50 75 100 125 150 v ds - dr ain-to-source voltage (v) c - capacitance (pf) c is s c os s c rss tran sfer characteristics on-resistance vs. drain current gate charge 0 20 40 60 80 100 120 140 012 34567 v gs - gate-to-source voltage (v) - drain current (a) i d 25 c - 55 c t c = 125 c 0.000 0.015 0.030 0.045 0.060 0 20 40 60 80 100 120 i d - drain current (a) v gs = 10 v - on-resistance ( ) r ds(on) 0 4 8 12 16 20 0 25 50 75 100 125 150 - gate-to-source voltage (v) q g - total gate charge (nc) v gs v ds = 100 v i d = 65 a dt - www. daysemi.jp
4 ty pical characteristics 25 c, unless otherwise noted on -resistance vs. junction temperature avalanche current vs. time r ds (on) - on-resistance (normalized) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 - 50 - 25 0 25 50 75 100 125 150 175 t j - junction temperature ( c) v gs = 10 v i d = 30 a t in (s) 1000 10 0.00001 0.001 0.1 1 0.1 (a)i da v 0.01 i av (a) at t a = 150 c 100 1 0.0001 i av (a) at t a = 25 c sou rce-drain diode forward voltage drain source breakdown vs. junction temperature v sd - source-to-dr ain voltage (v) - source current (a) i s 100 10 1 0.3 0.6 0.9 1.2 t j = 25 c t j = 150 c 0 180 190 200 210 220 230 240 - 50 - 25 0 25 50 75 100 125 150 175 t j - junction temperature (c) (v) v (br)dss i d = 1.0 ma dt - www. daysemi.jp
5 thermal ratings maxim um avalanche and drain current vs. case temperature 0 15 30 45 60 75 0 25 50 75 100 125 150 175 t c - ambient temper ature (c) - drain current (a) i d safe operating area v ds - drain-to-source voltage (v) * v gs minimum v gs at which r ds (on) is specified 1000 10 0.1 1 10 1000 0.1 100 t c = 25 c single pulse - drain current (a) i d 1 ms 10 ms 100 ms dc 10 s 100 s 1 100 > r ds (on) limited* norm alized thermal transient impedance, junction-to-case square wave pulse duration (s) 2 1 0.1 0.01 10 - 4 10 - 3 10 - 2 10 - 1 1 nor malized eff ective transient thermal impedance 0.2 0.1 duty cycle = 0.5 single pulse 0.05 0.02 dt - www. daysemi.jp
1 to-220ab no tes * m = 1.32 mm to 1.62 mm (dim ension including protrusion) heatsink hole for hvm m * 3 2 1 l l(1) d h(1) q ? p a f j(1) b(1) e(1) e e b c millimeters inches dim. min. max. min. max. a 4.25 4.65 0.167 0.183 b 0.69 1.01 0.027 0.040 b(1) 1.20 1.73 0.047 0.068 c 0.36 0.61 0.014 0.024 d 14.85 15.49 0.585 0.610 e 10.04 10.51 0.395 0.414 e 2.41 2.67 0.095 0.105 e(1) 4.88 5.28 0.192 0.208 f 1.14 1.40 0.045 0.055 h(1) 6.09 6.48 0.240 0.255 j(1) 2.41 2.92 0.095 0.115 l 13.35 14.02 0.526 0.552 l(1) 3.32 3.82 0.131 0.150 ? p 3.54 3.94 0.139 0.155 q 2.60 3.00 0.102 0.118 ecn: x12-0208-rev. n, 08-oct-12 dwg: 5471 package information
legal disclaimer notice www. daysemi.jp 1 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. din-tek intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, din-tek ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. din-tek makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, din-tek disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on din-tek s knowledge of typical requirements that are often placed on din-tek products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify din-tek s terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, din-tek products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the din-tek product could result in personal injury or death. customers using or selling din-tek products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized din-tek personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of din-tek . product names and markings noted herein may be trad emarks of their respective owners. material category policy din-tek intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some din-tek documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. din-tek intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some din-tek documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards. legal disclaimer notice www.daysemi.jp revision: 02-oct-12 1 document number: 72610 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. din-tek intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, din-tek ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. din-tek makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, din-tek disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on din-tek s knowledge of typical requirements that are often placed on din-tek products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify din-tek s terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, din-tek products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the din-tek product could result in personal injury or death. customers using or selling din-tek products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized din-tek personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of din-tek . product names and markings noted herein may be trad emarks of their respective owners. material category policy din-tek intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some din-tek documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. din-tek intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some din-tek documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
